Belt conveyor line in the transport operation, the material in the carrying parts should be well-proportioned, moderate. Uneven placement of the belt will cause deviation in the operation process. The primary reason for the asymmetry of the feed is that the landing position and orientation of the material are wrong. If the material is left biased, the belt is left biased and vice versa.

Belt connection problem

The belt connector will be damaged due to long time consumption or human factors will cause the connector to be damaged and become uneven. If the belt is bent or vulcanized rubber connector is wrong, the tension on both sides of the belt will be inconsistent. In the process of operation, the belt will deviate to the side with high tension, in which the deviation Angle of the belt connector is relatively large.

Belt deformation aging, tension reduction

If the belt conveyor's long-term operation, maintenance and upgrade are not timely, too many parts operate, and the waterline is aging and loose, the line transmission chain will slowly cause irreparable deformation and aging, and reduce tension immediately. This will cause internal stress asymmetry, resulting in belt deviation.

The tension on both sides of the belt is unbalanced

The key installation organization of belt conveyor is conveyor belt, which is responsible for the key daily task of material transportation. Therefore, if the belt quality is not good or the belt is used for a long time, it will damage aging, the tension on both sides of the belt will not be symmetrical, resulting in deviation. In particular, the deviation of the belt connector or the part of the non-parallel line is significant.

Drum rolling, buffer roller adhesive

After transporting materials for a period of time, especially when transporting mineral materials, assembly line manufacturers usually cause material bonding on the drum or buffer roller, which makes the drum or buffer roller part of the thickness promotion, leading to uneven ground stress on both sides, resulting in deviation. The belt is damaged by the buffer roller and the side force of the buffer roller. If there is deviation in the assembly place of both sides, the belt conveyor will cause deviation because of inconsistent side force in the operation process.