Assembly line manufacturers talk about the help direction of the assembly line to the production enterprise, often encounter customers to communicate with us that the production process of the enterprise product quality is unstable, difficult to manage workers, cost increases and other problems, these problems actually appear, so how to avoid or solve these problems? I think of wage increases, increased management actions, increased quality control, but what's behind all this action? The obvious answer is money, so it is necessary to invest in the automatic assembly line at once. Let me explain how he works:

A, operation method: installation work, goods transferred to the current standard section, the blocker automatic block goods and tray, barrel automatic stop; At the end of installation, it is necessary to transport to the next procedure, and the controller of the next procedure will automatically distinguish whether the next procedure is empty. If it is empty, it is reasonable for the previous procedure to press the transport button. The barrels of the two processes are gradually turned over at the same time, and the goods are automatically transferred from the previous procedure to the next procedure. If it is not empty, the previous process will fail to press the transport button, and the barrel rolling process will not be in position.

Ii. Other shows: the goods that fail the test are transported to the cache file process by the rotating process table, and released again after the cache file process is repaired.

3. Balance of production line: balance of production line is to make the staff or equipment as balanced as possible, so that the production rate of the production line can reach the specified level. Pipeline balance is involved in facility planning. The balance degree of pipeline can directly harm the production efficiency of manufacturing system software.

Pipeline balance is a problem related to facility planning. The total production to be achieved on a work platform is the same as the number of underlying operational modules assigned to the work platform. Assembly line balancing problem is basically all modules assigned to each work platform operation, in order to make every work platform in rhythm (that is, the adjacent two commodities according to the time interval at the end of the line) is in a busy situation, has more actual operation, thus makes the working platform of did not go to work time, idle time at least.

The balance of production line is a very important problem in the formulation and supervision of production line, because the balance of production line can directly harm the production efficiency of manufacturing system software. In the past decades, a large number of scientific studies have been carried out on the equilibrium problem of the assembly line, and a large number of theoretical results have been achieved.