In recent years, with the development of lean production, the market demand for fluent strips is great. The flow strip planning needs to consider the load by adding the fulcrum connector, together with the use of plastic coated double root canal to add strength. The following fluent joint factory family members for you to introduce the design of fluent.

In planning the strip structure, it was determined that the primary load was applied directly to the pipe and not to the connecting member. The maximum horizontal interval is set freely every 600mm (depending on the planned component of the concrete structure), the block method is necessary to have support columns and straight to the ground, and every 1200mm straight columns should be directly grounded.

For example, a product with casters should have two parallel structures. Horizontal interval 600mm, 30kg single slip smooth, safe loading. Overall strength than a few plastic pipe set on a series of plastic chuck, so the selection of coated pipe is necessary to be all the adhesion, connecting rod can be segmented. The frame width (center interval) of each slide column is placed at the container width +60mm, and the height of each floor is placed at the handbag height +50mm.

The inclined view point of the inclined trough is generally determined by sliding 5 to 8 degrees. Tilt Angle in data, heavy data and bottom handbag relatively smooth and quasi-que azimuth smaller. Outstanding product planning should be carefully considered, if not mobile, do not use casters to plan products as far as possible. Fluent strip products have sensitive circulation, according to your site situation and customer's comprehensive planning circulation strip solutions, sensitive disassembly, no welding, in the automotive, electronics, printing, clothing and other useful requirements, dust-free workshop device more sanitary, pollution-free.